BATTERY CHARGER TRANSFORMER T1 REPLACEMENT.

TM 11-6625-2976-40

2-38. BATTERY CHARGER TRANSFORMER T1 REPLACEMENT.

MATERIALS/PARTS: Transformer assembly T1(P/N 629-9110-001)

PRELIMINARY PROCEDURE: Remove battery charger cover (para 2-37).

1. Unsolder wires from transformer as shown in table above.

2. Remove heat shrink tubing (9) from all wires and unsolder wires as shown in table above.

3. Remove four screws (10) and lift transformer bracket(11) and transformer (12) from chassis.

INSTALLATION

NOTE

Position information plate on transformer as shown.

Install transformer (12) and transformer bracket(11) in chassis.

Install four screws (10) from bottom of chassis.

Install heat shrink tubing (9) on all wires. Do not shrink at this time.

Solder wires as shown in table above.

Slide heat shrink tubing (9) over solder points and shrink to fit.

FOLLOW-ON MAINTENANCE: Install battery charger cover (para 2-37).

2-82