INCANDESCENT LAMPS/SWITCH ACTUATING LENS REPLACEMENT.

TM 11-6625-2975-12

INCANDESCENT LAMPS/SWITCH ACTUATING LENS REPLACEMENT.

3-11.

EL9LX055

TOOLS: Electrical Extractor

REMOVAL

1. Remove switch actuating lens (1) with extraction tool.

2. Remove light bulb (2) by pulling straight out of switch receptacle (3) with tweezers. Do not dis-

card light bulb, until new bulb has been installed.

INSTALLATION

NOTE

For next step, refer to light bulb removed in step 2 above,

1. Cut and bend leads on replacement light bulb to same dimensions and same bends as old light

bulb.

2. Press light bulb (2) into switch receptacle (3).

3. Press switch actuating lens (1) into position on front panel until snapped into place.

3-16