|
|
TM 11-6625-4975-12
1-13.
TEST SET OPERATION. (CONT)
NOTE
Illustrations show lit keys in heavy outline, and lit indicators are filled in or blackened.
This method is used throughout the manual.
RDL/DDM/MOD display indicates the number of the bad memory chip and SELF TEST indicator lights
as shown above. After a short time, RDL/DDM/MOD display and SELF TEST indicator will flash on and
off to alert operator that a memory output is incorrect. Refer equipment to higher level of maintenance
if this happens.
Memory Check Passes
Test set automatically switches to VOR mode preset condition. Test set is now ready for use.
SELF-TEST OPERATION
Self-test operation consists of two parts: lamp check and memory check. When SELF TEST switch is
pressed and held, lamp check is performed. When SELF TEST switch is released, memory check is
performed.
1-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |