Section I. INTRODUCTION - TM-11-6625-2937-23P0003

TM 11-6625-2937-23P

SECTION I

INTRODUCTION

NOTE

1. Scope

This manual lists spares and repair parts; special tools;

Cannibalization or salvage may be

special test, measurement, and diagnostic equipment

used as a source of supply for any

(TMDE), and other special support equipment required

items source coded above except

for performance of organizational, direct support, and

those coded XA and aircraft support

general support maintenance of the AN/UKM-5 and MX-

items as restricted by AR 700-42.

10062/U. It authorizes the requisitioning and issue of

spares and repair parts as indicated by the source and

(2) Maintenance code. Maintenance codes

maintenance codes.

are assigned to indicate the levels of maintenance

authorized to USE and REPAIR support items. The

2. General

maintenance codes are entered in the third and fourth

This Repair Parts and Special Tools List is divided into

positions of the Uniform SMR Code format as follows:

the following sections:

(a) The maintenance code entered in

a. Section II. Repair Parts List. A list of spares

the third position will indicate the lowest maintenance

and repair parts authorized for use in the performance of

level authorized to remove, replace, and use the support

maintenance. The list also includes parts which must be

item. The maintenance code entered in the third

removed for replacement of the authorized parts. Parts

position will indicate one of the following levels of

lists are composed of functional groups in numeric

maintenance:

sequence, with the parts in each group listed in figure

Code

Application/Explanation

and item number sequence.

O--Support item is removed, replaced, used at the

b. Section III. Special Tools List. Not applicable.

organizational level.

c. Section IV. National Stock Number and Part

F--Support item is removed, replaced, used at the direct

Number Index. A list, in National item identification

support level.

number (NIIN) sequence, of all National stock numbers

D-Support items that are removed, replaced, used at

(NSN) appearing in the listings, followed by a list, in

depot, mobile depot, specialized repair activity

alphameric sequence, of all part numbers appearing in

only.

the listings. National stock numbers and part numbers

(b) The maintenance code entered in

are cross-referenced to each illustration figure and item

the fourth position indicates whether the item is to be

number appearance.

repaired and identifies the lowest maintenance level

3. Explanation of Columns

with the capability to perform complete repair (i.e., all

a. Illustration. This column is divided as follows:

authorized maintenance functions). This position will

contain one of the following maintenance codes:

(1) Figure number.

Indicates the figure

Code

Application/Explanation

number of the illustration on which the item is shown.

F--The lowest maintenance level capable of complete

(2) Item number.

The number used to

repair of the support item is the direct support

identify item called out in the illustration.

level.

b. Source, Maintenance, and Recoverability (SMR)

D--The lowest maintenance level capable of complete

Codes.

repair of the support item is the depot level.

(1) Source code. Source codes indicate the

Z--Nonreparable. No repair is authorized.

manner of acquiring support items for maintenance,

(3) Recoverability code.

Recoverability

repair, or overhaul of end items. Source codes are

codes are assigned to support items to indicate the

entered in the first and second positions of the Uniform

disposition action on unserviceable items.

The

SMR Code format as follows:

recoverability code is entered in the fifth position of the

Code

Definition

Uniform SMR Code format as follows:

PA --Item procured and stocked for anticipated or known

Recoverability codes Definition

usage.

Z--Nonreparable item. When unserviceable, condemn

PE --Support equipment procured and stocked for initial

and dispose at the level indicated in position 3.

issue or outfitting to specified maintenance

F--Reparable item. When uneconomically reparable,

repair activities.

condemn and dispose at the direct support level.

XD --A support item that is not stocked. When required,

D-Reparable item. When beyond lower level repair

item will be procured through normal supply

capability, return to depot. Condemnation and

channels.

disposal not authorized below depot level.