Preparation for Movement

TM 11-6625-2937-13

ing of the test set group are required to property maintain

(3) Replace foam packing in test case cover.

desert-operated equipment.

(4) Replace cover plate inside of test case

b. Operation Under Emergency Conditions. In

cover and secure with four fasteners.

(5) Obtain assistance and carefully place

the event of a digital tester failure the control-interface

control-interface unit in main body of test set case.

unit may be operated to supply power to an encoder or

(6) Replace foam packing on top of control-

decoder for unit BIT or analog circuit card testing.

interface unit.

2-7.

Preparation for Movement

(7) Obtain assistance and carefully replace

a. Preparation of Data Link Tester for

cover on test set case.

Movement.

To prepare the data link tester for

(8) Secure cover to test set case with quick

movement, refer to figure 2-1 and proceed as follows:

release cover latches.

(1) Disconnect all connecting cables.

Preparation of Digital Tester for Movement.

(2) Place and secure cables WI through W4,

Repack and store accessories of the digital tester in

three extender cards, card edge connector, ballast, coax

accordance with TM 11-6625-2951-13.

adapter and dummy load in test set case cover.

2-13