| |
TM 1-492045813&P
4-40.
REPAIR WIRING HARNESS (Cont)
(Sheet 2 of 2)
4-40.1. REMOVAL
a.
Tag and unsolder and pull wires from solder connections.
b.
Tag and disconnect mechanically fastened wire leads by removing associated hardware (nuts, washers, screws
etc.) or by pulling outward.
4-40.2. INSTALLATION
a.
Install wires (See G-1 & G-2).
b.
Solder wire to component leads, using solder (D5) and cover solder connections with heat shrink tubing (D2).
c.
Connect mechanically fastened wire leads and secure by installing associated hardware (nuts, washers, screws,
etc.) or by pushing inward.
4-40.3. FOLLOW ON MAINTENANCE
Performance check (para. 2-5)
END OF TASK
4-57
|