|
| |
TM 1-4920-458-13&P
4-37.
REMOVE AND REPLACE EMI FILTER (Cont)
(Sheet 2 of 2)
4-37.1. REMOVAL
a.
Remove four nuts (1) securing wires (2) to EMI filter (3).
b.
Tag & remove wires (2).
c.
Remove sleeving on wires (4 and 5).
d.
Tag and unsolder wires (4 and 5).
e.
Remove two mounting nuts (6) and two washers (7) from two mounting screws (8).
f.
Remove EMI filter (3) from chassis (9).
4-37.2. INSTALLATION
a.
Install EMI filter (3) on mounting screws (8) in chassis (9).
b.
Secure EMI filter (3) to chassis (9) by installing two washers (7) and two mounting nuts (6) to two mounting
screws (8).
c.
Position wires (2) on EMI filter (3) and secure with four nuts (1).
d.
Install sleeving (D2) to two wires (4 and 5).
e.
Using solder (D5), remove tags and solder two wires (4 and 5).
f.
Slide sleeving over solder joints and shrink in place.
4-37.3. FOLLOW ON MAINTENANCE
Performance check (para. 2-5)
END OF TASK
4-51
|
