|
| |
TM 1-4920-458-13&P
4-36.
REMOVE AND REPLACE TRANSFORMER (Cont)
(Sheet 2 of 2)
4-36.1. REMOVAL
a.
Tag and unsolder wires (1, 2, 3 and 4) from transformer leads.
b.
Remove four nuts (5) and four flat washers (6) from screws (7) holding transformer (8) to the base of chassis (9).
c.
Remove two wire connectors (10 and 11).
d.
Remove transformer (8) from base of chassis (9).
4-36.2. INSTALLATION
a.
Install transformer (8) on screws (7).
b.
Install two wire connectors (10 and 11).
c.
Secure transformer (8) to base of chassis (9) with four flat washers (6) and four nuts (5) on screws (7).
d.
Solder four wires (1, 2, 3 and 4) to leads of transformer (8) using solder (D5) and remove tags.
4-36.3. FOLLOW ON MAINTENANCE
Performance check (para. 2-5)
END OF TASK
4-49
|
