|
| |
TM 1-4920-458-13&P
4-32.
REMOVE AND REPLACE OIL FILTER (Cont)
(Sheet 2 of 2)
4-32.1. REMOVAL
a.
Remove oil sump (task 4-31).
b.
Loosen star nut (1) and screw (2) by turning counterclockwise.
c.
Swing retainer wire (3) away from bowl (4).
d.
Remove bowl (4) and rubber gasket (5) from housing (6).
e.
Remove filter (7) from housing (6).
4-32.2. INSTALLATION
a.
Install filter (7) into housing (6).
b.
Install rubber gasket (5) on housing (6).
c.
Install bowl (4) on housing (6).
d.
Swing retainer wire (3) under bowl (4) and adjust star nut (1) and screw (2) to tighten.
e.
Install oil sump per task 4-31.
4-32.3. FOLLOW ON MAINTENANCE
Performance check (para. 2-5)
END OF TASK
4-41
|
