| |
TM 1-4920-458-13&P
4-27.
REMOVE AND REPLACE FUSE HOLDER (Cont)
(Sheet 2 of 2)
4-27.1. REMOVAL
a.
Unsolder two wires (1) from fuse holder leads (2).
b.
Remove mounting nut (3) from fuse holder (4) on bottom side of operator panel (5).
c.
Remove fuse holder (4) from top of operator panel (5).
4-27.2. INSTALLATION
a.
Mount fuse holder (4) from top of operator panel (5).
b.
Secure fuse holder (4) to operator panel (5) by installing mounting nut (3) on bottom side of operator panel (5).
c.
Solder two wires (1) to fuse holder leads (2) using solder (D5).
4-27.3. FOLLOW ON MAINTENANCE
Performance check (para. 2-5)
END OF TASK
4-31
|