|
| |
TM 1-4920-458-13&P
C-5.
SPECIAL INFORMATION - Use the following subparagraphs as applicable:
a.
USABLE ON CODE The usable on code appears in the lower left corner of the Description column heading.
Usable on codes are shown as "UOC: ......." in the Description Column (justified left) on the first line applicable
item description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on
codes used in the RPSTL are:
Code
Used On
N/A
N/A
b.
FABRICATION INSTRUCTIONS Bulk materials required to manufacture items are listed in the Bulk Materials
functional Group of the RPSTL. Part number of bulk materials are also referenced in the description column of
the line item entry for the item to be manufactured/fabricated.
c.
ASSEMBLY INSTRUCTION - N/A
d.
KITS - Line item entries for repair parts kits appear in a group in Section II.
e.
INDEX NUMBERS Items which have the work BULK in the figure column will have an index number shown in
the item number column. This index number is a cross-reference between the National Stock Number/Part
Number Index and the bulk material list in Section II.
f.
ASSOCIATED PUBLICATIONS - N/A
C-6.
HOW TO LOCATE REPAIR PARTS
A.
When National Stock Number or Part Number is not known:
STEP 1
Using the table of contents, determine the assembly group or subassembly group to which the item belongs.
This is necessary since figures are prepared for assembly and subassembly groups, and listings are divided
into the same groups.
STEP 2
Find the figure covering the assembly group or subassembly group to which the item belongs.
STEP 3
Identify the item on the figure and note the item number.
STEP 4
Refer to the Repair Parts List for the figure to find the part number for the item number noted on the figure.
STEP 5
Refer to the Part Number Index to find the NSN, if assigned.
C-9
|
