|
| |
TM 1-4920-458-13&P
(3).
Items that are included in kits and sets are listed below the name of the kit or set.
(4).
Spare/repair parts that make up an assembled item are listed immediately following the assembled item line
entry.
(5).
Part numbers for bulk materials are referenced in this column in the line item entry for the Item to be
manufactured/fabricated.
(6).
When the item is not used with all serial numbers of the same model, the effective serial numbers are shown
on the last line of the description (before UOC).
(7).
The usable on code, when applicable (see paragraph C-5, Special Information).
(8).
In the Special Tools List section, the basis of issue (BOI) appears as the last line)s) in the entry for each
special tool, special TMDE, and other special support equipment. When density of equipments supported
exceeds density spread indicated in the basis of issue, the total authorization is increased proportionately.
(9)
The statement "END OF FIGURE" appears just below the last item description in Column 5 for given figure in
both Section II and Section III.
f.
QTY (Column (6)). The QTY (quantity per figure column) indicated the quantity of the item used in the
breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an
assembly. A "V" appearing in this column in lieu of a quantity indicates that the quantity is variable and the
quantity may vary from application to application.
C-7
|
