|
| |
TM 1-4920-458-13&P
4-45.
REMOVAL AND REPLACEMENT OF BELLOWS
(Sheet 2 of 2)
4-45.1. REMOVAL
a.
Unsolder and remove two wires (1 and 2) from bellows (3).
b.
Tag and remove flex hose (4) from elbow fitting (5).
c.
Tag and remove flex hose (6) from elbow fitting (7).
d.
Remove two screws (8) from bottom of chassis plate (9) and remove bellows (3).
e.
Remove elbow fittings (5 and 7).
4-45.2. INSTALLATION
a.
Apply sealube (D6) to elbow fittings (5 and 7) and install.
b.
Secure bellows (3) to chassis plate (9) with two screws (8) through bottom of chassis plate (9).
c.
Attach flex hose (6) to elbow fitting (7) and remove tag.
d.
Attach flex hose (4) to elbow fitting (5) and remove tag.
e.
Using solder (D5), attach two wires (1 and 2) to bellows (3).
END OF TASK
4-67/(4-68 blank)
|
