|
| |
TM 55-6695-220-13&P
Section II. SERVICE UPON RECEIPT
3-4.
INSTALLATION OF BATTERIES.
3-4
a.
The Tester is shipped without batteries. Table 3-1 lists
the fresh 1.5 volt battery as a BA-35 type and the fresh 45 volt
battery as a BA-36 type.
Table 3-1. Battery Type And Hookup
b.
The proper orientation of the two batteries at installation is shown in Figure 3-1. The spade lugs located at the
ends of the five colored leads are attached to the battery terminals as depicted in Table 3-1. The two thumb screws are
removed and the two battery latches are rotated out of the way for battery installation in the compartment. The latches
are returned to their original position and the thumb screws replaced before the compartment latches are secured.
3-2
|
