Section II. TOOLS AND EQUIPMENT - TM-5-6675-309-140050

ARMY TM 5-6675-309-14

MARINE CORPS TM 08840A-14/1

Furnished lead supplied with compo-

White

nent

Multiple wires within a shield or

Group

Hybrid splice configuration

multiple wires twisted in a group

are identified with a unique group

No connection; this terminal is re-

number (Example: SG12 or TG15).

served

For flexible printed wiring, this col-

Shielded group

umn is not applicable.

Shield lead (wire connecting a shield

Wires which contain unique letters

Route

to a termination point)

shall be bundled and routed sepa-

rately from all others. *REF indi-

Shielded pigtail

cates jumper of circuit prewired at

I n d i c a t e s a terminal which is not

Spare

subassembly level. *DIR indicates

wired and is not reserved for a specific

wire shall be routed separately from

function

harness by shortest possible route

between components. Minimum ser-

One conductor shielded

vice loop.

Two conductor shielded

Note

Not applicable.

Three conductor shielded, etc.

S3, etc.

Remark

Used for signal description or any

Twisted group

other type of comments.

Two conductors twisted

Rev

Not used.

Three conductors twisted

b. Wire List Notations. Notations used in the wire

Four conductors twisted, etc.

T4, etc.

lists are defined as follows:

Definition

Symbol

Period preceding capital letter indi-

Period

cates lowercase letter (Example: .A =

Section II. TOOLS AND EQUIPMENT

b. Expendable consumable maintenance supplies

8-6. General.

and materials are listed in appendix F.

a. Tools and equipment required for use at general

support level are listed in table 8-4.

8-2