Items Comprising an Operable Equipment

TM 11-6625-646-15

1-5.1. Items Comprising an Operable Equipment

Usable

Fig.

NSN

Qty

Nomenclature, part no., and mfr code

on code

No.

NOTE

The part number is followed by the applicable 5 digit Federal supply code for manufacturers

(FSCM) identified in SB 708-42 and used to identify manufacturer, distributor, or Government

agency, etc.

NOTE

A number 1 in the usable on code column refers to items comprising an operable TS-1894/ASM:

114E59874; number 2 refers to items comprising an operable TS-1894/ASM: 114E5987-8.

4920-00-959-6125

Test Set, Stabilization Equipment TS-1894/ASM: 114E5987-4;

77272 (This item is nonexpendable)

4920-00-133-7834

Test Set, Stabilization Equipment TS-1894/ASM: 114E5987-8;

77272 (This item is nonexpendable) consisting of:

661500-133-7838

Adapter, Test Set: 114V3058-1; 77272

1-1.1

5995-00-9091913

Cable Assembly, Special Purpose:

1, 2

1-1, 9-1

10-359134-1; 77820

5995-00-9091915

Cable Assembly, Special Purpose: 10-359141-1; 77820

1, 2

1-1, 9-1

599500-906-6403

Cable Assembly, Special Purpose: 10-359142-1; 77820

1, 2

1-1, 9-1

4730-00-684-0738

Coupling, Hose, Quick Disconnect: 1011-4; 00624;

1, 2

9-1

A02VS311-2; 77272

4720-00-720-0294

Hose Assembly: AN6270-4-42; 88044

1, 2

1-1

Operating Instructions: SSE500-3; 77272

1-1

Operating Instructions: SSE500-3, Dated I May 1969; 77272

1-1

5120-00-083-5019

Positioner, Contact: 11-7771-5; 77820

1, 2

1-1, 9-1

5120-00-083-5020

Positioner, Contact: 11-7771-6; 77820

1, 2

1-1, 9-1

5120-00-765-3688

Removal Kit, Contact: 11-6900; 77820

1, 2

1-1, 9-1

5120-00-765-3189

Tool, Contact Insertion: 11-6782; 77820

1, 2

1-1, 9-1

5120-00-8563732

Tool, Crimping: MS3191-1; 96096

1, 2

1-1, 9-1

6625-00-9181850

Bag Assembly Storage: A02VS310-1; 77272

1, 2

1-1, 9-1

A02V3064, and the sixth 2 Change 4 card A02V3068,

1-6. Description of Equipment

contain power supply components, load resistors, meter

multiplier resistors, and miscellaneous components.

1-7. (fig. 1-1). The test set is contained in a two-piece

The seventh card, 114E3040-47 is a four-stage

combination case. The case is airtight and watertight.

amplifier.

This card is part of the demodulator-

The cover of the case houses interconnecting cables,

modulator card test circuit. It is identical with the

power cables, and special tools and in the -8 test set,

amplifier card used in the SAS amplifier.

the adapter. Operating instructions for the test set are

mounted on a retainer assembly. The assembly is

1-9. The test set incorporates four test meters. The

attached to the operating panel with hinged latch

function meter indicates ac or dc voltages at the circuit

assemblies. The retainer assembly can be swung to

points selected by the FUNCTION switch. YAW, ROLL,

either side or completely removed when the test set is

and PITCH AXIS meters indicate the open-loop output

used. All components are mounted on a panel-chassis

of the corresponding SAS amplifier channel or the

assembly secured to the bottom of the case.

simulated feedback output of the actuator simulator card

manually operated relief valve is installed in the cover.

in the channel test circuit.

The valve permits equalizing test set air pressure to

atmosphere. The cover can be latched to the bottom of

1-10. An electrically operated air pump provides ram

the test set. Three retractable studs on the cover permit

and differential air pressures for checking the airspeed

mounting the test set on the back panel of a workbench.

and sideslip circuits in the SAS amplifier. Ram air

All controls, receptacles, indicators, and test jacks are

pressure is connected to the test set P (pitot) and S

on the front panel. All are identified.

(static) fittings. Differential air pressure is connected to

the test set L (left) and R (right) fittings. An AIRSPEED

1-8. The test set incorporates seven plug-in component

REG valve controls the ram air pressure.

cards. Three of these are actuator simulator cards

A02V3048. The fourth card A02V3060, the fifth card

Change 4