Section I. INTRODUCTION - TM-11-6625-620-40P-30009

TM 11-6625-620-40P-3

SECTION I

INTRODUCTION

NOTE

1. Scope

Cannibalization or salvage may be used

This manual lists spares and repair parts; special

as a source of supply for any items source

tools; special test, measurement, and diagnostic

coded above except those coded XA and

equipment (TMDE), and other special support

aircraft support items as restricted by

equipment required for performance, of general sup

AR 700-42.

port maintenance o f the TS-836/UGM-l. It

(2) Maintenance code. Maintenance codes are

authorizes the requisitioning and issue of spares and

assigned to indicate the levels of maintenance

repair parts as indicated by the source and main-

authorized to USE and REPAIR support items. The

tenance codes.

maintenance codes are entered in the third and

2. General

fourth positions of the Uniform SMR Code format

This Repair Parts and Special Tools List is divided

as follows:

into the following sections:

(a) The maintenance code entered in the third

a. Section II. Repair Parts List. A list of spares

position will indicate the lowest maintenance level

and repair parts authorized for use in the per-

authorized to remove, replace, and use the support

formance of maintenance. The list also includes

item. The maintenance code entered in the third

parts which must be removed for replacement of the

position will indicate one of the following levels of

authorized parts. Parts lists are composed of func-

maintenance:

tional groups in numeric sequence, with the parts in

Application/Explanation

Code

each group listed in figure and item number se-

OSupport item is removed, replaced, used at the

quence.

organizational level.

b. Section III. Special Tools List. Not applicable.

HSupport item is removed, replaced, used at the

c. Section IV. National Stock Number and Part

general support level.

N u m b e r Index. A list, in National item iden-

(b) The maintenance code entered in the

tification number (NIIN) sequence, of all National

fourth position indicates whether the item is to be

stock numbers (NSN) appearing in the listings,

repaired and identifies the lowest maintenance level

followed by a list, in alphanumeric sequence, of all part

with the capability to perform complete repair (i.e.,

numbers appearing in the listings. National stock

all authorized maintenance functions). This position

numbers and part numbers are cross-referenced to

will contain one of the following maintenance codes:

each illustration figure and item number ap-

Application/Explanation

Code

pearance.

HThe lowest maintenance level capable of com-

plete repair of the support item is the general

3. Explanation of Columns

support level.

a. Illustration. This column is divided as follows:

Z Nonreparable. No repair is authorized.

(1) Figure number. Indicates the figure number

(3) Recoverability code. Recoverability codes

of the illustration on which the item is shown.

are assigned to support items to indicate the

(2) Item number. The number used to identify

disposition action on unserviceable items. The

item called out in the illustration.

recoverability code is entered in the fifth position of

b. Source, Maintenance, and Recoverability

the Uniform SMR Code format as follows:

(SMR) Codes.

(1) Source code. Source codes indicate the man-

Recoverability

Definition

codes

ner of acquiring support items for maintenance,

Z -- Nonreparable item. When unserviceable, con-

repair, or overhaul of end items. Source codes are en-

demn and dispose at the level indicated in

tered in the first and second positions of the

position 3.

Uniform SMR Code format as follows:

D--Reparable item. When beyond lower level repair

Code

Definition

capability, return to depot. Condemnation

PA Item procured and stocked for anticipated or

and disposal not authorized below depot level.

known usage.

c. National Stock Number. Indicates the National

XD A support item that is not stocked. When

stock number assigned to the item and will be used

required, item will be procured through nor-

for requisitioning purposes.

mal supply channels.