REMOVAL AND REPLACEMENT PROCEDURES

TM 11-6625-3024-14/EE641-AC-MMA-010/E154 SYSEX/TO 33AA50-5-1-1

5-7. REPAIR

5-9. CIRCUIT CARD REMOVAL

Repair of the Exerciser involves the removal

T h e circuit cards in the Exerciser are

and replacement of the major subassembly.

by card guides and mate with an edge connector

on the mother board at the rear of the frame as-

5-8. REMOVAL AND REPLACEMENT PRO-

sembly.

CEDURES

Note

WARNING

Before removing the front panel, re-

Disconnect AC line cord and transport

move the Current Sense Loop.

power and signal cables prior to per-

forming removal and replacement pro-

1. Remove the front panel by removing four

cedures.

screws, four lock washers, and four flat washers

(1) on the panel. See Figure FO-13 for circuit card

Be sure that replacement parts are of the correct

location.

type, and that they are known to be good. Refer

to the Repair Parts and Special Tools List (RPSTL)

2. Remove the circuit card(s) as illustrated in

TM 11-6625-3024-24P for identification of re-

placement components.

5-10