Banana Jacks

TM 11-6625-3023-14/ET904-AA-MMA-010/E154 TS3684/TO 33A1-12-1173-1

(3) Replace circuit board assembly as described in paragraph 6-11b.

(4) Replace panel assembly as described in paragraph 6-8b.

6-15. Banana Jacks. The banana jacks (J2 and J4) may be removed and replaced by performing the following

procedures.

a. Removal. Perform the following procedure to remove either banana jack:

(1) Remove panel assembly as described in paragraph 6-8a.

(2) Unsolder the wire connected to banana jack.

(3) Remove the nut securing banana jack to panel assembly and remove banana jack.

b. Replacement. Perform the following procedure to replace banana jack on panel assembly:

(1) Insert banana jack in panel assembly and secure with nut.

(2) Solder wire on banana jack.

(3) Replace panel assembly as described in paragraph 6-8b.

6-16. Telephone Jack. The telephone jack (J1) may be removed and replaced by performing the following procedures.

a. Removal. Perform the following procedure to remove the telephone jack from the panel assembly:

(1) Remove the panel assembly as described in paragraph 6-8a.

(2) Tag and unsolder wires on the jack.

(3) Remove the nut, screw and lockwasher securing jack to panel assembly and remove jack.

b. Replacement. Perform the following procedure to replace the telephone jack:

(1) Insert jack in panel assembly and secure with screw, nut and lockwasher

(2) Solder wires as tagged,.

(3) Replace panel assembly as described in paragraph 6-8b.

6-17. Coax Jack. The coax jack (J3) may be removed and replaced by performing the following procedures.

6-23