Status Panel Assembly Power Supply 1A2PS1 (+12 Vdc)

TM 11-6625-2884-30/NAVAIR 16-35TS3615-2

REPLACEMENT OF POWER SUPPLIES (Continued)

Status Panel Assembly Power Supply 1A2PS1 (+12 Vdc). Remove status

in accordance with paragraph 3-32a and perform the

panel from

following:

REMOVAL

(1) Place the status panel in an upside down position on the test

bench.

(2) Remove caution plate (1) - four pan head screws, lockwashers and

flat washers.

(3) Tag and unsolder the 115 Vac input wires (2) and two output wires

(3) from Power Supply PS1.

(4) Remove the hex nuts, lockwashers and flat washers (4) from the

bottom side of the status panel to which the power supply is

attached.

(5) Lower and remove PS1 (5) from the status panel.

3-92