Removal and Replacement of Switch Knobs

TM 11-6625-2478-I2

4-9. Removal and Replacement of Switch

(1) Carefully place serviceable switch knob on

Knobs

switch shaft and align it in the same position as the

switch knob that was removed.

a. Removal To remove switch knobs 1A3MP8

NOTE

through 1A3MP14, proceed as follows:

The setscrew opposite the switch knob

(1) Note switch position.

pointer should be opposite the flat in the

(2) Loosen two setscrews.

switch shaft.

(3) Grasp switch knot and carefully remove it from

(2) Tighten the two setscrews.

the switch shaft

b. Replacement To replace switch knobs lA3MP8

through 1A3MP14, proceed as follows:

4-6