(o) Lower Camera, Still Picture KE-59A of Case, Test
Set CY-7117/AYM-9 and engage four panel fasteners
(fig. 1-4 ·).
Figure 3-9. Inserting film pack into camera..
Figure 3-8. Camera with back door open and steel
swung out for cleaning.
Figure 3-10. Camera controls and indicators
(2) Setting the exposure controls. To gain access to
the exposure controls, open access door (fig. 3-10).
and thread end of cable release into cable release
(a) To set shutter speed, move shutter speed lever
(3) Making the exposure. With shutter speed lever
until red mark is opposite desired speed on indicator.
Speeds are available from 1 second to 1/125 second.
and lens opening lever set to desired position, press
(b) To set lens opening, move lens opening lever
camera cover assembly into access opening to exclude
until lens opening pointer is opposite desired f number.
extraneous light. Make exposure as follows:
(c) To connect camera cable release, pass cable
release through hole in camera cover assembly
Before making exposure, be sure that exposure
door control is in ,LOCK position (fig. 3-2).