 |
|||
|
|
|||
|
Page Title:
Table -1. Test Set, Control Monitor-Recording Head ANA YM-9 Technical Characteristics |
|
||
| ||||||||||
|
|
 TM 11-6625-2478-12
Table -1. Test Set, Control Monitor-Recording Head
ANA YM-9 Technical Characteristics - Continued
Parameter or signal
Characteristics
Output data from Simulator, Monitor Input SM-/AY-9-
Continued:
Grid voltage ...........................................................-52.2 volt dc
Vertical deflection signals for RHA TEST SELECT switch
position:
KA60, IR/SLAR, CDM......................................14.3214 volts ac, 100 Hz Hz sine wave
KA?6 or PHOSPHOR ......................................8.35 0.08 volts ac, 100 Hz 1 Hz sine wave
Horizontal deflection signals for RHA TEST SELECT switch
position:
KA60, IR/SLAR, CDM ..............................................14.32 0.14 volts ac, 100 Hz Hz sine wave
KA76.... ...................................................................8.35 0.08 voltsac,100Hz 1Hz sine wave
+60
PHOSPHOR ............................................................30.4
volts peak-to-peak,
-4.5
6.25 0.655 kHz triangular wave
Unblinking pulses for RHA TEST SELECT switch position:
KA60, IR/SLAR, ......................................................80 5 volts dc pulses at 10 0.50 kHz pulse repetition rate with 20 3
sec pulse width
KA76 .......................................................................80 5 volts dc pulses at 5.85
0.29 kHz pulse repetition rate with 20 3 sec pulse width
PHOSPHOR ............................................................80 5 volts dc pulses at6.25 0.3 kHz pulse repetition rate with 80
+ 12 u sec pulse width
Table 1-2. Test Set Control Monitor-Recording Head
AN/A YM-9, Components (fig. 1-1)
FSN
Item
Qty
Height
Depth Width
Unit weight
(ea)
(in)
(in.)
(in.)
(lb)
6625-233-9202
Simulator, Monitor Input SM27/AYM-91
1
11 5/8
20 1/8
24
60 (max)
6625-242-3783
Cover, Test Set CW-1149/AYM-9
1
21
20 1/8
24
6625-242-3795
Case, Test Set CY-711AYM-9
1
20
13 1/2
29 l/4
60 (max)
5995-230408
Cable Assembly, Special Purpose, Electric CX-12726/U
1
1 ft. 4 in.
(2W4)
(lg)
S99181-9866
Cable Assembly, Special Purpose, Electrical CX-1272S/U
1
6 ft A.
(ZW2)
(lg)
5995-2300409
Cable Assembly, Special Purpose, Electrical CX-12727/U
1
10 in.
(2W5)
(lg)
5995431-3542
Cable Assembly, Special Purpose, Electric CX-12728/U
1
1 ft. 4 in.
(2W6)
(lg)
6625-1864149
Cable Assembly, Special Purpose, Electrical, Branched
5 f. 5 in.
CX-1272WAYM-9 (2W1)
(lg)
59954510437
Cable Assembly, Power, Electrical CX-12723/AYM-9 1
6 ft 4 i.
(2W3)
(lg)
662233-9198
Extended, Circuit Card MX-8966/AYM
1
5/8
9
5 3/8
9 oz
Camera cover assembly ............................................ 1
3/4
1 1/2
3 1/8
4 oz
Cable release............................................................. 1
10 in. (lg)
Welded plate assembly cover
1
1-8. Description
a test set panel assembly. The case is made up of
Cover, Test Set CW-1149/AYM-9 and a base. A
Test Set, Control Monitor-Recording Head AN/AYM-9
pressure relief valve is located on the base. The case is
consists of Simulator, Monitor Input SM427/AYM-9 (para
equipped with reinforced latch guards and handles, and
a) and Cas, Test Set CY-7117/AYM-9 (para 6).
a. Simulator, Monitor Input S M.-62/AYM-9 (fig.14).
is designed for routine relocation. All operating controls,
indicators, test points, and connectors are mounted on
Simulator, Monitor Input SM427/AYM-9 consist of a
the front panel.
warfight, rectangular, aluminum case and
1-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals