Maintenance code - TM-11-5895-833-34P-70006

TM 11-5895-833-34P-7/0967-LP-550-1164/TO 31R5-2MSC46-4

entered In the third position will indicate one of the

A -- Item requires special handling or

following levels of maintenance:

condemnation procedures because of

specific reasons (i e, precious metal

Code

Application/Explanation

content, high dollar value, critical material

or hazardous material).

Refer to

appropriate

manuals/directives

for

0 --

Support Item is removed, replaced, used

specific instructions

at the organizational level

F -- Support item is removed, replaced, used

c. National Stock Number Indicates the National

at the direct support level.

stock number assigned to the item and will be used for

D -- Support Items that are removed,

requisitioning purposes

replaced, used at depot, mobile depot,

specialized repair activity only

Federal Supply Code for Manufacturer

(FSCM) The FSCM is a 5-digit numeric code listed In SB

(b) The maintenance code entered In

708-41/42 which Is used to Identify the manufacturer,

the fourth position Indicates whether the Item is to be

distributor, or Government agency, etc

repaired and identifies the lowest maintenance level with

the capability to perform complete repair (i e, all

e. Part Number. Indicates the primary number

authorized maintenance functions) This position will

used by the manufacturer (individual, company, firm,

contain one of the following maintenance codes

corporation, or Government activity), which controls the

Code

Application/Explanation

design and characteristics of the Item by means of Its

engineering drawings, specifications, standards, and

inspection requirements to identify an Item or range of

F - The lowest maintenance level capable

items

of complete repair of the support Item

is the direct support level.

D - The lowest maintenance level capable

NOTE

of complete repair of the support Item

When a stock numbered item is

is the depot level

requisitioned, the repair part received

Z - Nonreparable No repair is authorized

may have a different part number than

the part being replaced.

(3) Recoverability code Recoverability

codes are assigned to support items to Indicate the

f. Description. Indicates the Federal Item name

disposition action on unserviceable items The

and, If required, a minimum description to Identify the

recoverability code is entered in the fifth position of the

item. In the Special Tools List, the initial basis of Issue

Uniform SMR Code format as follows:

(BOI) appears as the last line in the entry for each

special tool, special TMDE, and other special support

Recoverability

equipment. When density of equipments supported

Code

Definition

exceeds density spread Indicated in the basis of Issue,

the total authorization is increased accordingly

Z --

Nonreparable. Item When unserviceable,

condemn and dispose at the level

Unit of Measure (U/M).

Indicates the

indicated In position 3

standard of the basic quantity of the listed Item as used

F -- Reparable Item When uneconomically

In performing the actual maintenance function This

reparable condemn and dispose at the

measure is expressed by a two-character alphabetical

direct support level.

abbreviation (e g, ea, in, pr, etc) When the unit of

D -- Reparable item When beyond lower level

measure differs from the unit of Issue, the lowest unit of

repair capability, return to depot.

Issue that will satisfy the required units of measure will

Condemnation

and

disposal

not

be requisitioned

authorized below depot level

L -- Reparable Item Repair, condemnation,

h. Quantity Incorporated In Unit Indicates the

and disposal not authorized below

quantity of the Item used In the breakout shown on the

depot/specialized repair activity level

Illustration figure, which is prepared for a