Recoverability code - TM-11-5895-833-34P-20006

TM 11-5895-833-34P-2/NAVELEX 0967-LP-550-1063/TO 31R5-2MSC46-4

Code

Application/Explanation

c. National Stock Number. Indicates the National

stock number assigned to the item and will be used for

F---Support item is removed, replaced, used

requisitioning purposes.

at the direct support level.

d. Federal Supply Code for Manufacturer (FSCM).

D---Support items that are removed, re-

placed, used at depot, mobile depot,

The FSCM is a 5-digit numeric code listed in SB 708-

specialized repair activity only

41142 which is used to identify the manufacturer,

(b) The maintenance code entered in the

distributor, or Government agency, etc.

fourth position indicates whether the item is to be

e. Part Number. Indicates the primary number used

repaired and identifies the lowest maintenance level with

the capability to perform complete repair (i.e., all

by the manufacturer (individual, company, firm,

authorized maintenance functions) This position will

corporation, or Government activity), which controls the

contain one of the following maintenance codes:

design and characteristics of the item by means of its

engineering drawings, specifications, standards, and

Code

Application/Explanation

inspection requirements to identify an item or range of

items.

F---The lowest maintenance level capable of

NOTE

complete repair of the support item is the

direct support level.

When a stock numbered item is requisi-

D---The lowest maintenance level capable of

tioned, the repair part received , may

complete repair of the support item is the

have a different part number than the

depot level.

part being replaced.

Z---Nonreparable. No repair is authorized

f. Description. Indicates the Federal item name

(3) Recoverability code. Recoverability codes are

and, if required, a minimum description to identify the

assigned to support items to indicate the disposition

item. In the Special Tools List, the initial basis of issue

action on unserviceable Items. The recoverability code is

(BOI) appears as the last line in the entry for each

entered in the fifth position of the Uniform SMR Code

special tool, special TMDE, and other special support

format as follows

equipment When density of equipments supported

exceeds density spread indicated in the basis of Issue,

Recoverability

the total authorization is increased accordingly.

Code

Definition

g. Unit of Measure (U/M). Indicates the standard of

Z---Nonreparable item. When unserviceable,

the basic quantity of the listed item as used in performing

condemn and dispose at the level indicated in

the actual maintenance function. This measure is

position 3

expressed by a two-character alphabetical abbreviation

F---Reparable item.

When uneconomically

(e.g., ea, in, pr, etc). When the unit of measure differs

reparable, condemn and dispose at the direct

from the unit of issue, the lowest unit of issue that will

support level

satisfy the required units of measure will be

D---Reparable item. When beyond lower level

requisitioned.

repair

capability,

return

depot.

h. Quantity Incorporated in Unit.

Indicates the

Condemnation and disposal not authorized

quantity of the item used in the breakout shown on the

below depot level.

illustration figure, which is prepared for a functional

A---Item requires special handling or condemnation

group, subfunctional group, or an assembly. A "V"

procedures because of specific reasons (ie, precious

appearing in this column in lieu of a quantity indicates

metal content, high dollar value, critical material or

that no specific quantity is applicable (e.g., shims,

hazardous

material)

Refer

appropriate

spacers, etc).

manuals/directives

for

specific

instructions.