Section I. INTRODUCTION - TM-11-5895-833-34P-20005

TM 11-5895-833-34P-2/NAVELEX 0967-LP-550-1063/TO 31R5-2MSC46-4

SECTION I

INTRODUCTION

1. Scope

(2) Item number. The number used to identify

This manual lists spares and repair parts, special tools;

item called out in the illustration.

special test, measurement, and diagnostic equipment

(TMDE), and other special support equipment required

b. Source, Maintenance, and Recoverability (SMR)

for performance of Direct Support and General Support

Codes.

Maintenance of the CV-3084/MSC-46(V) and CV-3084A/

MSC-46(V). It authorizes requisitioning and issue of

(1) Source code. Source codes indicate the

spares and repair parts as indicated by the source and

maintenance codes.

manner of acquiring support items for maintenance,

repair, or overhaul of end items. Source codes are

entered in the first and second positions of the Uniform

2. General

SMR Code format as follows:

This Repair Parts and Special Tools List is divided into

Code

Definition

the following sections:

PA---Item procured and stocked for anticipated

a. Section II. Repair Parts List A list of spares and

or known usage.

repair parts authorized for use in the performance of

PE---Support equipment procured and stocked

maintenance. The list also includes parts which must be

for initial use or outfitting to specified

removed for replacement of the authorized parts. Parts

maintenance repair activities.

lists are composed of functional groups in numeric

XB---Item is not procured or stocked. If not

sequence, with the parts in each group listed in figure

available through salvage, requisition.

and item number sequence.

NOTE

b. Section II. Special Tools List. A list of special

Cannibalization or salvage may be used

tools, special TMDE, and other special support

as a source of supply for any Items

equipment authorized by this RPSTL for the performance

source coded above except those coded

of maintenance.

XA and aircraft support items as

restricted by AR 750-1.

c. Section IV. National Stock Number and Part

Number Index. A list, in National item identification

(2) Maintenance code. Maintenance codes are

number (NIIN) sequence, of all National stock numbers

assigned to indicate the levels of maintenance

(NSN) appearing in the listings, followed by a list, in

authorized to USE and REPAIR support items. The

alphameric sequence, of all part numbers appearing in

maintenance codes are entered in the third and fourth

the listings. National stock numbers and part numbers

positions of the Uniform SMR Code format as follows:

are cross-referenced to each illustration figure and Item

number appearance.

(a) The maintenance code entered in the third

position will indicate the lowest maintenance level

3. Explanation of Columns

authorized to remove, replace, and use the support item.

The maintenance code entered in the third position will

a. Illustration. This column is divided as follows:

indicate one of the following levels of maintenance:

(1) Figure number Indicates the figure number of

the

illustration on which the item is shown.