Recoverability code - TM-11-5895-1092-24P0005

TM 11-5895-1092-24P

Code

Application/Explanation

The FSCM is a 5-digit numeric code listed in SB 708-

H-Support item is removed, replaced, used at the

41/42 which is used to identify the manufacturer,

general support level.

distributor, or Government agency, etc.

D-Support items that are removed, replaced, used at

e. Part Number. Indicates the primary number

depot, mobile depot, specialized repair activity

used by the manufacturer (individual, company, firm,

only.

corporation, or Government activity), which controls the

(b) The maintenance code entered in the

design and characteristics of the item by means of its

fourth position indicates whether the item is to be

engineering drawings, specifications, standards, and

repaired and identifies the lowest maintenance level with

inspection requirements to identify an item or range of

the capability to perform complete repair (i.e., all

items.

authorized maintenance functions). This position will

NOTE

contain one of the following maintenance codes:

When a stock numbered item is requisitioned, the repair

Code

Application/Explanation

part received may have a different part number than the

F-The lowest maintenance level capable of complete

part being replaced.

repair of the support item is the direct support

f. Description Indicates the Federal item name

level.

and, if required, a minimum description to identify the

H-The lowest maintenance level capable of complete

item.

repair of the support item is the general support

g. Unit of Measure (U/M). Indicates the standard of

level.

the basic quantity of the listed item as used in performing

D-The lowest maintenance level capable of complete

the actual maintenance function. This measure is

repair of the support item is the depot level.

expressed by a two-character alphabetical abbreviation

Z-Nonreparable. No repair is authorized.

(e.g., ea, in, pr, etc). When the unit of measure differs

(3) Recoverability code. Recoverability codes are

from the unit of issue, the lowest unit of issue that will

assigned to support items to indicate the disposition

satisfy the required units of measure will be

action on unserviceable items. The recoverability code is

requisitioned.

entered in the fifth position of the Uniform SMR Code

h. Quantity Incorporated in Unit. Indicates the

format as follows:

quantity of the item used in the breakout shown on the

Recoverability codes

Definition

illustration figure, which is prepared for a functional

Z-Nonreparable item. When unserviceable, condemn

group, subfunctional group, or an assembly.

and dispose at the level indicated in position 3.

4. Special Information

F--Reparable item. When uneconomically reparable,

a. Usable on codes are shown in the description

condmen and dispose at the direct support level.

column. Uncoded items are applicable to all models.

H-Reparable item. When uneconomically reparable,

Identification of the usable on codes used in this

condemn and dispose at the general support

publication are:

level.

Code

Used on

D--Reparable item. When beyond lower level repair

DNN

CV-3200/TSC

capability, return to depot. Condemnation and

DNP

CV-3200/TSC

disposal not authorized below depot level.

DNQ

CV-3199/TSC

L-Reparable item. Repair, condemnation, and disposal

b. Detailed manufacturing instructions for items

not authorized below depot/- specialized repair

source coded to be manufactured or fabricated are found

activity level.

in TM 11-5895-1092-34.

A--Item requires special handling or condemnation

c. The following publication pertains to the CV-

procedures because of specific reasons (Lie.,

3200/TSC and CV-3199/TSC and its components:

precious metal content, high dollar value, critical

TM 11-5895-1092-24P, Converter, Electronic Frequency,

material or hazardous material). Refer to

CV-3200/TSC and Converter, Electronic Frequency, CY-

appropriate manuals/directives for specific

3199/TSC (To be published)

instructions.

d. National stock numbers (NSN's) that are missing

c. National Stock Number. Indicates the National

from P source coded items have been applied for and

stock number assigned to the item and will be

will be added to this TM by future change/revision when

used for requisitioning purposes.

they are entered in the Army Master Data File (AMDF).

d. Federal Supply Code for Manufacturer (FSCM).

Until the NSN's are