|
| |
TM 1-6625-736-13&P
4-16 FRONT PANEL I/F PWA (CONTINUED)
4-16
CAUTION
Join the Signal Generator PWA and the Front Panel I/F PWA with care so as to not bend the
integrated connecting pins.
f.
Join the Signal Generator PWA (18) and the Front Panel I/F PWA (20) by pressing the integrated pins on the
Signal Generator PWA board into the female connector on the Front Panel I/F PWA board.
g.
Install four screws (8), four flatwashers (9) and four lockwashers (10).
h.
Connect cable assembly (15) onto Front Panel I/F PWA (20). Install two screws (14), two flatwashers (13) and
two lockwashers (12).
i.
Position Top Plate (7) of Top Plate assembly on enclosure (17). Install four screws (2).
j.
Start at one corner and press seal (1) into position until flush on enclosure (17).
k.
Install top cover.
END OF TASK
4-18
|
